Sunday, 27 September 2015

USBasp USBISP 3.3V / 5V AVR Programmer USB ATMEGA8











USBasp is a USB in-circuit programmer for Atmel AVR controllers. It simply consists of an ATMega88 or an ATMega8 and a couple of passive components. The programmer uses a firmware-only USB driver, no special USB controller is needed.

Features

  • Works under multiple platforms. Linux, Mac OS X and Windows are tested.
  • No special controllers or smd components are needed.
  • Programming speed is up to 5kBytes/sec.
  • SCK option to support targets with low clock speed (< 1,5MHz).
  • Planned: serial interface to target (e.g. for debugging).

Drivers

On Linux and MacOS X no kernel driver is needed. Windows requires a driver for USBasp:
usbasp-windriver.2011-05-28.zip (70 kB)

en How to install USBasp drivers on Windows 8
en Installing Usbasp Driver Software in Windows 8.1

Software





  With power and programming indicator light
  On-board overcurrent protection
  Support 5V and 3.3V power supply
 51 serials:
 AT89S51 、 AT89S52 、 AT89S53 、 AT89S8252
 AVR serials:
 ATTiny12(L) 、  ATTiny13(V) 、 ATTiny15(L) 、 ATTiny24(V) 、 ATTiny25(V) 、 ATTiny26(L) 、  ATTiny2313(V) 、 ATTiny44(V) 、 ATTiny45(V) 、 ATTiny84(V) 、 ATTiny85(V) 、  AT90S2313(L) 、 AT90S2323(L) 、 AT90S2343(L) 、 AT90S1200(L) 、 AT90S8515(L) 、  AT90S8535(L) 、 ATMEGA48(V) 、 ATMEGA8(L) 、 ATMEGA88(V) 、 ATMEGA8515(L) 、  ATMEGA8535(L) 、 ATMEGA16(L) 、 ATMEGA162(V) 、 ATMEGA163(L) 、 ATMEGA164(V) 、  ATMEGA165(V) 、 ATMEGA168(V) 、 ATMEGA169(V) 、 ATMEGA169P(V) 、 ATMEGA32(L) 、  ATMEGA324(V) 、 ATMEGA325(V) 、 ATMEGA3250(V) 、 ATMEGA329(V) 、 ATMEGA3290(V) 、  ATMEGA64(L) 、 ATMEGA640(V) 、 ATMEGA644(V) 、 ATMEGA645(V) 、 ATMEGA6450(V) 、  ATMEGA649(V) 、 ATMEGA6490(V) 、 ATMEGA128(L) 、 ATMEGA1280(V) 、 ATMEGA1281(V) 、  ATMEGA2560(V) 、 ATMEGA2561(V) 、 AT90CAN32 、 AT90CAN64 、 AT90CAN128 、 AT90PWM2(B) 、  AT90PWM3(B) and so on.

No comments:

Post a Comment